{"id":364,"date":"2024-03-14T13:39:20","date_gmt":"2024-03-14T12:39:20","guid":{"rendered":"https:\/\/leren.ovh\/?p=364"},"modified":"2024-03-14T13:48:28","modified_gmt":"2024-03-14T12:48:28","slug":"dell-s5224f-on-os10-upgrade","status":"publish","type":"post","link":"https:\/\/leren.ovh\/index.php\/2024\/03\/14\/dell-s5224f-on-os10-upgrade\/","title":{"rendered":"Dell S5224F-ON OS10 Upgrade"},"content":{"rendered":"\n

This document is based on the following page<\/a>. It also supposes your switch came directly from the box.<\/p>\n\n\n\n

Connect the switch with the console port (backside of switch) with a serial cable.
Make sure you use the following settings.
Correct COM port off course
Speed = 115200; Data bits = 1 ; Stop bits=1 ; Parity = None ; Flow Control = None<\/p>\n\n\n\n

After boot, Configure the management port.
ip vrf management
interface mgmt1\/1\/1
no ip address dhcp
ip address 192.168.30.200\/24
exit<\/p>\n\n\n\n

image install ftp:\/\/:<user>:<password>@<ftp-server>\/<binary.bin>
–> This copies the OS from the ftp-server onto the image directory and installs it in the standby-slot<\/strong><\/p>\n\n\n\n

show image status to follow progress. (copy to switch is fast)
You will notice that it takes long to get past <install packages 5 out of 9>
OS10# show image status
Image Upgrade State: install
==================================================
File Transfer State: transfer-success
State Detail: Completed: No error

Task Start: 2024-03-14T18:22:59Z
Task End: 2024-03-14T18:23:08Z
Transfer Progress: 100 %
Transfer Bytes: 868439745 bytes
File Size: 868439745 bytes
Transfer Rate: 102723 kbps

Installation State: install
State Detail: In progress: Install packages (5 of 9)
Task Start: 2024-03-14T18:25:10Z
Task End: 0000-00-00T00:00:00Z
<\/em>
When done. Check the bootup sequence
–> show boot detail
It shows that @next boot it still is the active being used and not the standby
<\/p>\n\n\n\n

Make the standby image active @ next boot.
OS10#boot system standby
OS10# show boot detail
Current system image information detail:
==========================================
Type: Node-id 1
Boot Type: Flash Boot
Active Partition: A
Active SW Version: 10.5.2.6
Active SW Build Version: 10.5.2.6.354
Active Kernel Version: Linux 4.9.210
Active Build Date\/Time: 2021-06-15T08:30:09Z
Standby Partition: B
Standby SW Version: 10.5.5.8
Standby SW Build Version: 10.5.5.8.243
Standby Build Date\/Time: 2023-12-08T21:57:25Z
Next-Boot: standby[B]<\/em><\/p>\n\n\n\n

reload<\/p>\n\n\n\n

Verify after boot.<\/p>\n","protected":false},"excerpt":{"rendered":"

This document is based on the following page. It also supposes your switch came directly from the box. Connect the switch with the console port (backside of switch) with a serial cable.Make sure you use the following settings.Correct COM port off courseSpeed = 115200; Data bits = 1 ; Stop bits=1 ; Parity = None… Read More »Dell S5224F-ON OS10 Upgrade<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"neve_meta_sidebar":"","neve_meta_container":"","neve_meta_enable_content_width":"","neve_meta_content_width":0,"neve_meta_title_alignment":"","neve_meta_author_avatar":"","neve_post_elements_order":"","neve_meta_disable_header":"","neve_meta_disable_footer":"","neve_meta_disable_title":"","_themeisle_gutenberg_block_has_review":false,"_ti_tpc_template_sync":false,"_ti_tpc_template_id":"","footnotes":""},"categories":[28],"tags":[27],"class_list":["post-364","post","type-post","status-publish","format-standard","hentry","category-network","tag-os10"],"_links":{"self":[{"href":"https:\/\/leren.ovh\/index.php\/wp-json\/wp\/v2\/posts\/364","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/leren.ovh\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/leren.ovh\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/leren.ovh\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/leren.ovh\/index.php\/wp-json\/wp\/v2\/comments?post=364"}],"version-history":[{"count":3,"href":"https:\/\/leren.ovh\/index.php\/wp-json\/wp\/v2\/posts\/364\/revisions"}],"predecessor-version":[{"id":369,"href":"https:\/\/leren.ovh\/index.php\/wp-json\/wp\/v2\/posts\/364\/revisions\/369"}],"wp:attachment":[{"href":"https:\/\/leren.ovh\/index.php\/wp-json\/wp\/v2\/media?parent=364"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/leren.ovh\/index.php\/wp-json\/wp\/v2\/categories?post=364"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/leren.ovh\/index.php\/wp-json\/wp\/v2\/tags?post=364"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}